研究者詳細 - 田邉　裕貴

論文 - 田邉　裕貴

分割表示71 件中 21 - 40 件目／全件表示 >>

Study on Ultrasonic Excitation Method to Improve Detectability of Sonic-IR Testing 国際誌

Hirotaka Tanabe, Yui Izumi, Naoto Mizuyama

Proceedings of The 6th Japan - US Symposium Emerging NDE Capabilities for a Safer World 2018年6月

Sonic-IR法における検査対象の振動状態と欠陥検出性について

和泉遊以，田邉裕貴，水山直人

日本材料学会第67期学術講演会講演論文集 67 - 68 2018年5月

Laser irradiation method for high-efficiency pulsed laser milling integrated die/mold machining: effects of laser-tracking irradiation on laser milling accuracy 査読

Ogawa K., Nakagawa H., Imada T., Tanabe H.

Advances in Materials and Processing Technologies 4 ( 1 ) 158 - 165 2018年1月

記述言語：英語掲載種別：研究論文（学術雑誌）出版者・発行元：Advances in Materials and Processing Technologies

© 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group. In small and precision die and mold making, small-diameter end mills are often used through rough to finish machining processes. However, higher-efficiency machining technology in die and mold manufacturing is needed because shorter delivery time has become essential in recent years. On the other hand, the demand for dies and molds made of difficult-to-cut materials such as cemented carbide and fine ceramics has increased. Therefore, the authors were motivated to apply a laser process because lasers can remove work independently of its mechanical properties. The authors proposed a novel process for high-efficiency die and mold machining. The process integrates laser milling for rough processing and cutting with micro-end-mill tools for finishing. In the present paper, some experiments were carried out to clarify the effects of a laser-tracking irradiation method for laser-milling quality in deep milling of a hardened die steel workpiece. As a result, it was found that the laser-tracking irradiation provided higher-accuracy laser milling while maintaining process efficiency.

DOI： 10.1080/2374068X.2017.1410754

Scopus

その他リンク： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85063957575&origin=inward

Pulsed Laser Milling Integrated Die/Mold Machining: Analysis of Heat-affected Zone Obtained by Laser-milling Process for Hardened Die Steel 査読

Keiji Ogawa, Heisaburo Nakagawa, Takumi Imada, Hirotaka Tanabe and Taichiro Ukawa

Proceedings of the 20th International Symposium on Advances in Abrasive Technology 535 - 540 2017年12月

Effect of Laser Power on Delamination Initiation Behaviour of CrAlN Coating on Steel Substrate Laser-Quenched after Coating Process under Rolling Contact Fatigue 査読国際誌

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu and Yuki Nakamura

Procedia Structural Integrity 1005 - 1010 2017年9月

セラミックスコーティングとレーザ熱処理を複合化した新表面改質技術とその応用招待査読

田邉裕貴,　小川圭二

材料試験技術 62 ( 3 ) 158 - 163 2017年7月

Study on heat generation behaviors in Sonic-IR method 査読国際誌

Hirotaka Tanabe, Yui Izumi, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 251 - 254 2015年9月

Development of new sonic-ir method using ultrasonic wave inputted through water 査読国際誌

Yui Izumi, Hirotaka Tanabe, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 275 - 278 2015年9月

疲労き裂進展過程におけるき裂周辺の磁束密度分布変化と塑性変形の関係に関する研究査読

田邉裕貴，和泉遊以，島田純，高松徹

材料 63 ( 12 ) 857 - 863 2014年12月

Delamination initiation life and growth behaviour of ceramic coated steels quenched after coating process under rolling contact loading condition 査読

H. Tanabe, K. Ogawa, M. Nishizawa, Y. Izumi and T. Takamatsu

Materials Research Innovations 18 S4-57 - S5-61 2014年8月

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process 査読

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Applied Mechanics and Materials 597 157 - 160 2014年7月

A Proposal of Process Strategy for Micro-cutting Edge Fabrication: Effects of Shape Formation after Laser Hardening 査読

Keiji Ogawa, Hirotaka Tanabe and Heisaburo Nakagawa

Key Engineering Materials 625 545 - 549 2014年7月

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process 査読

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Proceedings of 2014 The 3rd International Conference on Advanced Materials Design and Mechanics& Workshop on Android Robotics 2 ( 171 ) 1 - 4 2014年5月

Mechanical properties and deformation of ceramic coated steels heat-treated by scanning laser 査読

Tanabe, H., Ogawa, K., Izumi, Y., Nishizawa, M., Takamatsu, T., Nakagawa, H.

Advanced Materials Letters 5 248 - 254 2014年5月

Investigation of Change Mechanism of Magnetic Flux Density Distribution around Fatigue Cracks 査読

H. Tanabe, Y. Izumi, T. Takamatsu, J. Shimada, K. Kida, E. Santos

13th International Symposium on Nondestructive Characterization of Materials (NDCM-XIII) 2014年4月

Effects of laser heat treatment on mechanical properties of ceramic coated steels Part 1 – Laser irradiation conditions and mechanical properties of ceramic coated steels 査読

H. Tanabe, K. Ogawa, Y. Izumi, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S12 - S16 2014年3月

Effects of laser heat treatment on mechanical properties of ceramic coated steelsPart 2 – Fracture strength of laser heat treated ceramic thin film 査読

H. Tanabe, K. Ogawa, Y. Izumi, T. Takamatsu, H. Nakagawa, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S17 - S21 2014年3月

Three-dimensional magnetic microscopy of early stage fatigue in WMZ of low carbon steel plates (JIS-SS400) 査読

K. Kida, T. Honda, E. C. Santos, K. Saruwatari, M. Uryu, K. Houri, H. Tanabe, K. Kanemasu

Materials Research Innovations 18 S66 - S70 2014年3月

セラミックス被覆鋼のレーザ焼入れ処理査読

田邉裕貴、小川圭二、更家拓弥、西澤基行、高松徹、中川平三郎、和泉遊以

日本機械学会論文集Ａ編 79 ( 806 ) 1434 - 1443 2013年10月

Effect of Crack Opening on Distribution of Magnetic Flux Density around Fatigue Cracks 査読

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu, Jun Shimada, Katsuyuki Kida, Edson Costa Santos

Advanced Materials Research 813 20 - 23 2013年9月

　前のページ - 次のページ　

<田邉 裕貴>

論文 - 田邉 裕貴

<田邉　裕貴>

論文 - 田邉　裕貴