Faculty Profiles - TANABE Hirotaka

Papers - TANABE Hirotaka

Division display >> ／ All the affair displays1 - 71 of about 71

Studies on Deformation Behaviour of Thin Carbon Steel Plate by Laser Quenching and its Mechanisms Reviewed

88 ( 913 ) 2022.8

Shape formation after laser hardening for highprecision micro-cutting edge Reviewed International journal

Keiji Ogawa, Hirotaka Tanabe, Heisaburo Nakagawa, Mitsuhiro Goto

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES 8 ( 2 ) 1575 - 1582 2022

Sonic-IR法によるスポット溶接部の健全性評価に関する研究

和泉遊以、田邉裕貴、中村司、江口勇気、曲田吉史

日本機械学会関西支部第96期定時総会講演会講演論文集 2021.3

Relationship between Heat Generation at Single Edge Penetrating Crack in Strip Specimen and Vibrational Modes of Specimen in Sonic-IR Method Reviewed

Hirotaka TANABE, Yui IZUMI, Yuki AKIMICHI

69 ( 12 ) 902 - 909 2020.12

Study for Intelligent Laser Heat Treatment Based on Process Temperature Monitoring Reviewed International journal

Mitsuhiro Goto, Keiji Ogawa, Hirotaka Tanabe, Takuto Yamaguchi, Hideki Hagino

Proceedings of 18th International Conference on Precision Engineering 419 - 420 2020.12

A fundamental study for full circumferential hardening of shaft parts using high-speed scan laser and cylindrical internal mirror

65 - 66 2020.9

炭素鋼平板の焼入れ特性と変形挙動に及ぼすレーザ照射条件の影響

福田航平，田邉裕貴，後藤光宏，小川圭二，中川平三郎

2020年度精密工学会秋季大会学術講演会講演論文集 227 - 228 2020.9

PROPOSAL OF HIGH-QUALITY LASER HARDENING SYSTEM FOR SHAFT PARTS USING CYLINDRICAL MIRROR AND RING-BEAM SHAPED BY HIGH-SPEED LASER SCAN Reviewed International journal

Hirotaka Tanabe, Keiji Ogawa, Heisaburo Nakagawa, Hirohito Tsukada and Yuki Goto

Proceedings of the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing 2020.6

Effect of laser irradiation conditions on deformation behaviors of carbon steel plate

189 - 189 2019.12

Sonic-IR法における検査対象の振動状態とき裂部での発熱に関する基礎的検討

田邉裕貴，和泉遊以，水山直人，秋道優希

第19回破壊力学シンポジウム講演論文集 62 - 66 2019.11

Sonic-IR 法における検査対象の振動状態と欠陥部での発熱に関する基礎的検討

田邉裕貴，和泉遊以，秋道優希

日本機械学会2019年度年次大会講演論文集 2019.9

Study on hardening and deformation in laser hardening for small and thin parts: effects of dummy irradiation method Reviewed International journal

Keiji Ogawa, Hirotaka Tanabe, Mitsuhiro Goto & Heisaburo Nakagawa

Advances in Materials and Processing Technologies 5 ( 3 ) 379 - 385 2019.5

Fundamental study on hardening method on corner parts using a top-hat rectangular shape laser beam Reviewed

Journal of the Japan Society for Abrasive Technology 63 ( 4 ) 178 - 184 2019.4

High precision laser hardening method using dummy irradiation for small and thin parts: fundamental study on hardening and deformation Reviewed

Ogawa K., Tanabe H., Nakagawa H., Goto M.

Advances in Materials and Processing Technologies 5 ( 1 ) 162 - 171 2019.1

Language：English Publishing type：Research paper (scientific journal) Publisher：Advances in Materials and Processing Technologies

© 2018, © 2018 Informa UK Limited, trading as Taylor & Francis Group. A laser hardening process has received much attention because of its ability as a local heat treatment method without requiring a cooling solution. A local heat treatment with a small power density can result in the small deformation of the workpiece that can be performed without a post-process for finishing. However, such superior features can be demonstrated in the case of a workpiece with a large volume and a heat capacity for self-cooling. Small and thin parts such as brake disks and miniature guide rails might not have enough volume or heat capacity to show the features. Therefore, we propose a novel method that completes the heat treatment and deformation-less processes only using a laser. The method has a laser irradiation for hardening and another one for deformation correction. In the present paper, we carried out a fundamental study on hardening and deformation and demonstrated the potential of the proposed method.

DOI： 10.1080/2374068X.2018.1540128

Scopus

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85064013005&origin=inward

Effect of indentation angle on wear behavior of ceramic thin film under cyclic sphere indentation

18 ( 53 ) GS130 - GS134 2018.12

Fundamental study for application of sonic-IR method to nondestructive inspection for large structure

103 286 - 287 2018.9

パルスレーザと切削を用いた高能率金型加工について—超硬合金のレーザミリング特性に関する基礎的検討—

右川太一郎，小川圭二，中川平三郎，今田琢巳，田邉裕貴

2018年度精密工学会秋季大会学術講演会講演論文集 352 - 353 2018.8

ダミー照射を用いた薄物小型部品の高精度レーザ焼入れ法—炭素鋼製平板材での硬化と変形に関する基礎的検討—

小川圭二，田邉裕貴，後藤光宏，中川平三郎，上田遼介

2018年度精密工学会秋季大会学術講演会講演論文集 371 - 372 2018.8

隅角部を有する部品に対するトップハット分布矩形レーザによる高精度焼入れ

小川圭二，田邉裕貴，中川平三郎，塚田悠人，川上昂人

2018年度砥粒加工学会学術講演会講演論文集（ABTEC2018） E20-1 - E20-6 2018.8

Development of new sonic-IR method by immersion excitation International journal

Yui Izumi，Hirotaka Tanabe，Yuto Iguchi，Takahide Sakagami

Proceedings of The 6th Japan - US Symposium Emerging NDE Capabilities for a Safer World 2018.6

Study on Ultrasonic Excitation Method to Improve Detectability of Sonic-IR Testing International journal

Hirotaka Tanabe, Yui Izumi, Naoto Mizuyama

Proceedings of The 6th Japan - US Symposium Emerging NDE Capabilities for a Safer World 2018.6

Vibrational state of test object and defect detectability in Sonic-IR method

67 - 68 2018.5

Laser irradiation method for high-efficiency pulsed laser milling integrated die/mold machining: effects of laser-tracking irradiation on laser milling accuracy Reviewed

Ogawa K., Nakagawa H., Imada T., Tanabe H.

Advances in Materials and Processing Technologies 4 ( 1 ) 158 - 165 2018.1

Language：English Publishing type：Research paper (scientific journal) Publisher：Advances in Materials and Processing Technologies

© 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group. In small and precision die and mold making, small-diameter end mills are often used through rough to finish machining processes. However, higher-efficiency machining technology in die and mold manufacturing is needed because shorter delivery time has become essential in recent years. On the other hand, the demand for dies and molds made of difficult-to-cut materials such as cemented carbide and fine ceramics has increased. Therefore, the authors were motivated to apply a laser process because lasers can remove work independently of its mechanical properties. The authors proposed a novel process for high-efficiency die and mold machining. The process integrates laser milling for rough processing and cutting with micro-end-mill tools for finishing. In the present paper, some experiments were carried out to clarify the effects of a laser-tracking irradiation method for laser-milling quality in deep milling of a hardened die steel workpiece. As a result, it was found that the laser-tracking irradiation provided higher-accuracy laser milling while maintaining process efficiency.

DOI： 10.1080/2374068X.2017.1410754

Scopus

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85063957575&origin=inward

Pulsed Laser Milling Integrated Die/Mold Machining: Analysis of Heat-affected Zone Obtained by Laser-milling Process for Hardened Die Steel Reviewed

Keiji Ogawa, Heisaburo Nakagawa, Takumi Imada, Hirotaka Tanabe and Taichiro Ukawa

Proceedings of the 20th International Symposium on Advances in Abrasive Technology 535 - 540 2017.12

Effect of Laser Power on Delamination Initiation Behaviour of CrAlN Coating on Steel Substrate Laser-Quenched after Coating Process under Rolling Contact Fatigue Reviewed International journal

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu and Yuki Nakamura

Procedia Structural Integrity 1005 - 1010 2017.9

A New Surface Modification Technique by Combination of Ceramic Coating and Laser Heat Treatment and Its Applications Invited Reviewed

62 ( 3 ) 158 - 163 2017.7

Study on heat generation behaviors in Sonic-IR method Reviewed International journal

Hirotaka Tanabe, Yui Izumi, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 251 - 254 2015.9

Development of new sonic-ir method using ultrasonic wave inputted through water Reviewed International journal

Yui Izumi, Hirotaka Tanabe, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 275 - 278 2015.9

Study on Relationship between Changes of Magnetic Flux Density Distribution around Fatigue Crack and Plastic Deformation Reviewed

63 ( 12 ) 857 - 863 2014.12

Delamination initiation life and growth behaviour of ceramic coated steels quenched after coating process under rolling contact loading condition Reviewed

H. Tanabe, K. Ogawa, M. Nishizawa, Y. Izumi and T. Takamatsu

Materials Research Innovations 18 S4-57 - S5-61 2014.8

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process Reviewed

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Applied Mechanics and Materials 597 157 - 160 2014.7

A Proposal of Process Strategy for Micro-cutting Edge Fabrication: Effects of Shape Formation after Laser Hardening Reviewed

Keiji Ogawa, Hirotaka Tanabe and Heisaburo Nakagawa

Key Engineering Materials 625 545 - 549 2014.7

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process Reviewed

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Proceedings of 2014 The 3rd International Conference on Advanced Materials Design and Mechanics& Workshop on Android Robotics 2 ( 171 ) 1 - 4 2014.5

Mechanical properties and deformation of ceramic coated steels heat-treated by scanning laser Reviewed

Tanabe, H., Ogawa, K., Izumi, Y., Nishizawa, M., Takamatsu, T., Nakagawa, H.

Advanced Materials Letters 5 248 - 254 2014.5

Investigation of Change Mechanism of Magnetic Flux Density Distribution around Fatigue Cracks Reviewed

H. Tanabe, Y. Izumi, T. Takamatsu, J. Shimada, K. Kida, E. Santos

13th International Symposium on Nondestructive Characterization of Materials (NDCM-XIII) 2014.4

Effects of laser heat treatment on mechanical properties of ceramic coated steels Part 1 – Laser irradiation conditions and mechanical properties of ceramic coated steels Reviewed

H. Tanabe, K. Ogawa, Y. Izumi, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S12 - S16 2014.3

Effects of laser heat treatment on mechanical properties of ceramic coated steelsPart 2 – Fracture strength of laser heat treated ceramic thin film Reviewed

H. Tanabe, K. Ogawa, Y. Izumi, T. Takamatsu, H. Nakagawa, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S17 - S21 2014.3

Three-dimensional magnetic microscopy of early stage fatigue in WMZ of low carbon steel plates (JIS-SS400) Reviewed

K. Kida, T. Honda, E. C. Santos, K. Saruwatari, M. Uryu, K. Houri, H. Tanabe, K. Kanemasu

Materials Research Innovations 18 S66 - S70 2014.3

Laser Quenching for Ceramic Coated Steels Reviewed

H. Tanabe, K. Ogawa, T. Saraie, M. Nishizawa, T. Takamatsu, H. Nakagawa, Y. Izumi

79 ( 806 ) 1434 - 1443 2013.10

Effect of Crack Opening on Distribution of Magnetic Flux Density around Fatigue Cracks Reviewed

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu, Jun Shimada, Katsuyuki Kida, Edson Costa Santos

Advanced Materials Research 813 20 - 23 2013.9

A Proposal of Process Strategy for Micro-cutting Edge Fabrication: Effects　of Shape Formation after Laser Hardening Reviewed

Keiji Ogawa, Hirotaka Tanabe and Heisaburo Nakagawa

Proceedings of ASPEN2013 (5th International Conference of Asian Society for Precision Engineering and Nanotechnology) 1057 1 - 5 2013

Evaluation of Endurance Characterizations of Ceramic Thin Films Deposited on the Cemented Carbide Substrate by Cyclic Sphere Indentation Testing Reviewed

78 ( 794 ) 1423 - 1431 2012.10

Quenching of Ceramic Coated Steels by Scanning Laser Reviewed

Hirotaka Tanabe, Keiji Ogawa, Yui Izumi, Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino, Takuto Yamaguchi

Advanced Materials Research 566 427 - 430 2012.9

Influence of Laser Heat Treatment on Fracture Strength of Ceramic Thin Film Reviewed

Hirotaka Tanabe, Keiji Ogawa, Yui Izumi1, Tohru Takamatsu, Heisaburo Nakagawa,Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino and Takuto Yamaguchi

Advanced Materials Research 566 ( 145 ) 145 - 149 2012.9

Strengthening of Ceramic Coated Steel by Laser Quenching Reviewed

Hirotaka Tanabe, Keiji Ogawa, Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino, Takuto Yamaguchi

Applied Mechanics and Materials 157-158 175 - 180 2012.2

A New Surface Modification Method by Combination of Ceramic Coating and Laser Heat Treatment Reviewed

Hirotaka Tanabe, Keiji Ogawa, Yui Izumi, Takuya Saraie, Motoyuki Nishizawa, Tohru Takamatsu, Heisaburo Nakagawa

New Methods of Damage and Failure Analysis of Structural Part 175 - 183 2012

Effects of Magnetizations on Three Dimensional Magnetic Flux Density of Pre-cracked Medium Carbon Low Alloy Steel (JIS S45C) Reviewed

Katsuyuki Kida, Edson Costa Santos, Takashi Honda, Hitonobu Koike, Justyna Rozwadowska, Megumi Uryu, K. Houri, Hirotaka Tanabe

Applied Mechanics and Materials 83 230 - 236 2011.7

The Influence of Stress Ratio on Changes in Magnetic Flux Density Around Fatigue Crack Tips of Carbon Tool Steel Reviewed

Takashi Honda, Katsuyuki Kida, Edson Costa Santos, Hitonobu Koike, Justyna Rozwadowska, Megumi Uryu, K. Houri, Hirotaka Tanabe

Applied Mechanics and Materials 83 210 - 215 2011.7

Correlation between Magnetic Flux Density and Crack Propagation in SAE 52100 Measured by Scanning Hall Probe Microscope with a Small-gap Probe Reviewed

Edson Costa Santos, Katsuyuki Kida, Takashi Honda, Justyna Anna Rozwadowska, Keisuke Houri, Hirotaka Tanabe

Proc. Processing and Fabrication of Advanced Materials XIX 1541 - 1546 2011.1

Observation of Magnetic Flux Density Distribution around Fatigue Crack and Application to Non-Destructive Evaluation of Stress Intensity Factor Reviewed

H. Tanabe, K. Kida, T. Takamatsu, N. Itoh, E.C. Santos

Procedia Engineering 10 881 - 886 2011

Changes in magnetic flux density around fatigue crack tips of carbon tool steels Reviewed

Takashi Honda, Katsuyuki Kida, Edson Costa Santos, Hirotaka Tanabe

Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics 7522 2010.4

Changes in Magnetic Flux Density around Fatigue Crack Tips of Bearing Steels Reviewed

Katsuyuki Kida, Edson Costa Santos, Takashi Honda and Hirotaka Tanabe

Proc. of Eighteenth International Conference on Processing and Fabrication of Advanced Materials 18 535 - 544 2009.12

Three Dimensional Observations of Magnetic Flux Density around Fatigue Crack Tips of Bearing Steels Reviewed

Katsuyuki KIDA, Edson Costa SANTOS, Takashi HONDA, Hirotaka TANABE

Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 8 2009.11

Effects of Heat Treatment on Mechanical Properties of Ceramic Thin Films Reviewed

Hirotaka Tanabe, Tohru Takamatsua, Tetsuro Hamada

Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 7 2009.11

Changes in Magnetic Flux Density around Fatigue Crack Tips of Carbon Tool Steels Reviewed

Takashi HONDA, Katsuyuki KIDA, Edson Costa SANTOS, Hirotaka TANABE

Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 8 2009.11

Laser Quenching of TiN Coated Steel Reviewed

75 ( 757 ) 1171 - 1176 2009.9

Evaluation of Fracture Toughness of TiN Thin Film on Cemented Carbide by the Sphere Indentation Testing Reviewed

75 ( 757 ) 1165 - 1170 2009.9

Changes in magnetic flux density around fatigue crack tips Reviewed

Katsuyuki Kida, Hirotaka Tanabe, Hideki OKANO

Fatigue & Fracture of Engineering Materials & Structures 32 180 - 188 2009.3

Effects of Substrate Quenching after TiN Coating on Tribological Properties of TiN Film Reviewed

Hirotaka Tanabe, Yoshio Miyoshi, Tohru Takamatsu, Shuichi Sagara

Journal of Solid Mechanics and Materials Engineering 2 ( 8 ) 999 - 1007 2008.8

Evaluation of Fracture Strength of TiN Thin Film on Cemented Carbide Reviewed

Tohru TAKAMATSU, Yoshio MIYOSHI, Hirotaka TANABE and Takayoshi ITOH

JSME Journal of Solid Mechanics and Materials Engineering 2 ( 2 ) 281 - 290 2008.4

Effects of Post Quenching on Mechanical Properties of TiN Film Coated on Steel Substrate Reviewed

Hirotaka Tanabe, Yoshio Miyoshi, Tohru Takamatsu, Shuichi Sagara, Eiichi Inoue and Kazuo Kondo

JSME Journal of Solid Mechanics and Materials Engineering 1 ( 3 ) 299 - 309 2007.4

Evaluation of the Fracture Toughness on the Surface Layer in HIP-Sintered Silicon Nitride Reviewed

Tohru Takamatsu, Yoshio Miyoshi, Hirotaka Tanabe and Muneyoshi Segawa

JSME Journal of Solid Mechanics and Materials Engineering 1 ( 2 ) 181 - 190 2007.4

TiN薄膜の摩擦摩耗特性に及ぼす成膜後基板焼入れ処理の影 Reviewed

田邉裕貴，三好良夫，高松徹，相良秀一

日本機械学会論文集A編 72 ( － ) 568 - 573 2006.4

Evaluation of fracture strength of TiN thin films deposited on WC-Co substrate Reviewed

Tohru Takamatsu, Yoshio Miyoshi, Hirotaka Tanabe and Takayoshi Itoh

12th Asia-Pacific Conference on Non-Destructive Testing 2006 (NZ Auckland)(CD-ROM), － ( － ) － - － 2006.4

TiN被覆鋼の平面曲げ疲労強度に及ぼす成膜後基板焼入れ処理の影響 Reviewed

高松徹，田邉裕貴，三好良夫

日本機械学会論文集A編 72 ( － ) 1725 - 1730 2006.4

成膜後基板焼入れ処理によるTiN薄膜の密着強度改善メカニズム Reviewed

田邉裕貴，三好良夫，高松徹，相良秀一

日本機械学会論文集A編 72 ( － ) 1383 - 1388 2006.4

TiN被覆超硬合金における薄膜の破壊強度評価 Reviewed

高松徹，三好良夫，田邉裕貴，伊藤隆良

日本機械学会論文集A編 72 ( － ) 1194 - 1199 2006.4

TiN薄膜の機械的特性に及ぼす成膜後基板焼入れ処理の影響 Reviewed

田邉裕貴，三好良夫，高松徹，相良秀一，近藤一男，井上栄一

日本機械学会論文集A編 71 ( － ) 95 - 101 2005.4

HIP焼結Si3N4における表面層の破壊じん性評価 Reviewed

高松徹，三好良夫，田邉裕貴，瀬川領祥

日本機械学会論文集A編 71 ( － ) 1147 - 1152 2005.4

TiN薄膜の機械的特性に及ぼす成膜後基板焼入れ時の加熱時間の影響 Reviewed

田邉裕貴，三好良夫，高松徹，相良秀一

日本機械学会論文集A編 71 ( － ) 891 - 896 2005.4

球－平板接触応力下における半円形表面き裂の応力拡大係数評価 Reviewed

田邉裕貴，三好良夫，高松徹，岩谷真吾，木田勝之

日本機械学会論文集A編 71 ( － ) 288 - 293 2005.4

　PREV-NEXT　

<TANABE Hirotaka>

Papers - TANABE Hirotaka