Faculty Profiles - TANABE Hirotaka

Papers - TANABE Hirotaka

Division display21 - 40 of about 71／ All the affair displays >>

Study on Ultrasonic Excitation Method to Improve Detectability of Sonic-IR Testing International journal

Hirotaka Tanabe, Yui Izumi, Naoto Mizuyama

Proceedings of The 6th Japan - US Symposium Emerging NDE Capabilities for a Safer World 2018.6

Vibrational state of test object and defect detectability in Sonic-IR method

67 - 68 2018.5

Laser irradiation method for high-efficiency pulsed laser milling integrated die/mold machining: effects of laser-tracking irradiation on laser milling accuracy Reviewed

Ogawa K., Nakagawa H., Imada T., Tanabe H.

Advances in Materials and Processing Technologies 4 ( 1 ) 158 - 165 2018.1

Language：English Publishing type：Research paper (scientific journal) Publisher：Advances in Materials and Processing Technologies

© 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group. In small and precision die and mold making, small-diameter end mills are often used through rough to finish machining processes. However, higher-efficiency machining technology in die and mold manufacturing is needed because shorter delivery time has become essential in recent years. On the other hand, the demand for dies and molds made of difficult-to-cut materials such as cemented carbide and fine ceramics has increased. Therefore, the authors were motivated to apply a laser process because lasers can remove work independently of its mechanical properties. The authors proposed a novel process for high-efficiency die and mold machining. The process integrates laser milling for rough processing and cutting with micro-end-mill tools for finishing. In the present paper, some experiments were carried out to clarify the effects of a laser-tracking irradiation method for laser-milling quality in deep milling of a hardened die steel workpiece. As a result, it was found that the laser-tracking irradiation provided higher-accuracy laser milling while maintaining process efficiency.

DOI： 10.1080/2374068X.2017.1410754

Scopus

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85063957575&origin=inward

Pulsed Laser Milling Integrated Die/Mold Machining: Analysis of Heat-affected Zone Obtained by Laser-milling Process for Hardened Die Steel Reviewed

Keiji Ogawa, Heisaburo Nakagawa, Takumi Imada, Hirotaka Tanabe and Taichiro Ukawa

Proceedings of the 20th International Symposium on Advances in Abrasive Technology 535 - 540 2017.12

Effect of Laser Power on Delamination Initiation Behaviour of CrAlN Coating on Steel Substrate Laser-Quenched after Coating Process under Rolling Contact Fatigue Reviewed International journal

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu and Yuki Nakamura

Procedia Structural Integrity 1005 - 1010 2017.9

A New Surface Modification Technique by Combination of Ceramic Coating and Laser Heat Treatment and Its Applications Invited Reviewed

62 ( 3 ) 158 - 163 2017.7

Study on heat generation behaviors in Sonic-IR method Reviewed International journal

Hirotaka Tanabe, Yui Izumi, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 251 - 254 2015.9

Development of new sonic-ir method using ultrasonic wave inputted through water Reviewed International journal

Yui Izumi, Hirotaka Tanabe, Takayuki Hibino, Tohru Takamatsu and Takahide Sakagami

Proceedings of 13th International Workshop on Advanced Infrared Technology & Applications 275 - 278 2015.9

Study on Relationship between Changes of Magnetic Flux Density Distribution around Fatigue Crack and Plastic Deformation Reviewed

63 ( 12 ) 857 - 863 2014.12

Delamination initiation life and growth behaviour of ceramic coated steels quenched after coating process under rolling contact loading condition Reviewed

H. Tanabe, K. Ogawa, M. Nishizawa, Y. Izumi and T. Takamatsu

Materials Research Innovations 18 S4-57 - S5-61 2014.8

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process Reviewed

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Applied Mechanics and Materials 597 157 - 160 2014.7

A Proposal of Process Strategy for Micro-cutting Edge Fabrication: Effects of Shape Formation after Laser Hardening Reviewed

Keiji Ogawa, Hirotaka Tanabe and Heisaburo Nakagawa

Key Engineering Materials 625 545 - 549 2014.7

Flaking Initiation Life under Rolling Contact Fatigue of Ceramic Coated Steels Quenched after Coating Process Reviewed

Hirotaka Tanabe, Keiji Ogawa, Motoyuki Nishizawa, Yui Izumi, Tohru Takamatsu

Proceedings of 2014 The 3rd International Conference on Advanced Materials Design and Mechanics& Workshop on Android Robotics 2 ( 171 ) 1 - 4 2014.5

Mechanical properties and deformation of ceramic coated steels heat-treated by scanning laser Reviewed

Tanabe, H., Ogawa, K., Izumi, Y., Nishizawa, M., Takamatsu, T., Nakagawa, H.

Advanced Materials Letters 5 248 - 254 2014.5

Investigation of Change Mechanism of Magnetic Flux Density Distribution around Fatigue Cracks Reviewed

H. Tanabe, Y. Izumi, T. Takamatsu, J. Shimada, K. Kida, E. Santos

13th International Symposium on Nondestructive Characterization of Materials (NDCM-XIII) 2014.4

Effects of laser heat treatment on mechanical properties of ceramic coated steels Part 1 – Laser irradiation conditions and mechanical properties of ceramic coated steels Reviewed

H. Tanabe, K. Ogawa, Y. Izumi, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S12 - S16 2014.3

Effects of laser heat treatment on mechanical properties of ceramic coated steelsPart 2 – Fracture strength of laser heat treated ceramic thin film Reviewed

H. Tanabe, K. Ogawa, Y. Izumi, T. Takamatsu, H. Nakagawa, T. Saraie, M. Gotoh, H. Hagino, T. Yamaguchi

Materials Research Innovations 18 S17 - S21 2014.3

Three-dimensional magnetic microscopy of early stage fatigue in WMZ of low carbon steel plates (JIS-SS400) Reviewed

K. Kida, T. Honda, E. C. Santos, K. Saruwatari, M. Uryu, K. Houri, H. Tanabe, K. Kanemasu

Materials Research Innovations 18 S66 - S70 2014.3

Laser Quenching for Ceramic Coated Steels Reviewed

H. Tanabe, K. Ogawa, T. Saraie, M. Nishizawa, T. Takamatsu, H. Nakagawa, Y. Izumi

79 ( 806 ) 1434 - 1443 2013.10

Effect of Crack Opening on Distribution of Magnetic Flux Density around Fatigue Cracks Reviewed

Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu, Jun Shimada, Katsuyuki Kida, Edson Costa Santos

Advanced Materials Research 813 20 - 23 2013.9

　 PREV - NEXT 　

<TANABE Hirotaka>

Papers - TANABE Hirotaka