Papers - TANABE Hirotaka
-
A Proposal of Process Strategy for Micro-cutting Edge Fabrication: Effects of Shape Formation after Laser Hardening Reviewed
Keiji Ogawa, Hirotaka Tanabe and Heisaburo Nakagawa
Proceedings of ASPEN2013 (5th International Conference of Asian Society for Precision Engineering and Nanotechnology) 1057 1 - 5 2013
-
Evaluation of Endurance Characterizations of Ceramic Thin Films Deposited on the Cemented Carbide Substrate by Cyclic Sphere Indentation Testing Reviewed
78 ( 794 ) 1423 - 1431 2012.10
-
Quenching of Ceramic Coated Steels by Scanning Laser Reviewed
Hirotaka Tanabe, Keiji Ogawa, Yui Izumi, Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino, Takuto Yamaguchi
Advanced Materials Research 566 427 - 430 2012.9
-
Influence of Laser Heat Treatment on Fracture Strength of Ceramic Thin Film Reviewed
Hirotaka Tanabe, Keiji Ogawa, Yui Izumi1, Tohru Takamatsu, Heisaburo Nakagawa,Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino and Takuto Yamaguchi
Advanced Materials Research 566 ( 145 ) 145 - 149 2012.9
-
Strengthening of Ceramic Coated Steel by Laser Quenching Reviewed
Hirotaka Tanabe, Keiji Ogawa, Takuya Saraie, Mitsuhiro Gotoh, Hideki Hagino, Takuto Yamaguchi
Applied Mechanics and Materials 157-158 175 - 180 2012.2
-
A New Surface Modification Method by Combination of Ceramic Coating and Laser Heat Treatment Reviewed
Hirotaka Tanabe, Keiji Ogawa, Yui Izumi, Takuya Saraie, Motoyuki Nishizawa, Tohru Takamatsu, Heisaburo Nakagawa
New Methods of Damage and Failure Analysis of Structural Part 175 - 183 2012
-
Effects of Magnetizations on Three Dimensional Magnetic Flux Density of Pre-cracked Medium Carbon Low Alloy Steel (JIS S45C) Reviewed
Katsuyuki Kida, Edson Costa Santos, Takashi Honda, Hitonobu Koike, Justyna Rozwadowska, Megumi Uryu, K. Houri, Hirotaka Tanabe
Applied Mechanics and Materials 83 230 - 236 2011.7
-
The Influence of Stress Ratio on Changes in Magnetic Flux Density Around Fatigue Crack Tips of Carbon Tool Steel Reviewed
Takashi Honda, Katsuyuki Kida, Edson Costa Santos, Hitonobu Koike, Justyna Rozwadowska, Megumi Uryu, K. Houri, Hirotaka Tanabe
Applied Mechanics and Materials 83 210 - 215 2011.7
-
Correlation between Magnetic Flux Density and Crack Propagation in SAE 52100 Measured by Scanning Hall Probe Microscope with a Small-gap Probe Reviewed
Edson Costa Santos, Katsuyuki Kida, Takashi Honda, Justyna Anna Rozwadowska, Keisuke Houri, Hirotaka Tanabe
Proc. Processing and Fabrication of Advanced Materials XIX 1541 - 1546 2011.1
-
Observation of Magnetic Flux Density Distribution around Fatigue Crack and Application to Non-Destructive Evaluation of Stress Intensity Factor Reviewed
H. Tanabe, K. Kida, T. Takamatsu, N. Itoh, E.C. Santos
Procedia Engineering 10 881 - 886 2011
-
Changes in magnetic flux density around fatigue crack tips of carbon tool steels Reviewed
Takashi Honda, Katsuyuki Kida, Edson Costa Santos, Hirotaka Tanabe
Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics 7522 2010.4
-
Changes in Magnetic Flux Density around Fatigue Crack Tips of Bearing Steels Reviewed
Katsuyuki Kida, Edson Costa Santos, Takashi Honda and Hirotaka Tanabe
Proc. of Eighteenth International Conference on Processing and Fabrication of Advanced Materials 18 535 - 544 2009.12
-
Three Dimensional Observations of Magnetic Flux Density around Fatigue Crack Tips of Bearing Steels Reviewed
Katsuyuki KIDA, Edson Costa SANTOS, Takashi HONDA, Hirotaka TANABE
Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 8 2009.11
-
Effects of Heat Treatment on Mechanical Properties of Ceramic Thin Films Reviewed
Hirotaka Tanabe, Tohru Takamatsua, Tetsuro Hamada
Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 7 2009.11
-
Changes in Magnetic Flux Density around Fatigue Crack Tips of Carbon Tool Steels Reviewed
Takashi HONDA, Katsuyuki KIDA, Edson Costa SANTOS, Hirotaka TANABE
Proc. Int. Conf. Experimental Mechanics 2009 4 1 - 8 2009.11
-
Laser Quenching of TiN Coated Steel Reviewed
75 ( 757 ) 1171 - 1176 2009.9
-
Evaluation of Fracture Toughness of TiN Thin Film on Cemented Carbide by the Sphere Indentation Testing Reviewed
75 ( 757 ) 1165 - 1170 2009.9
-
Changes in magnetic flux density around fatigue crack tips Reviewed
Katsuyuki Kida, Hirotaka Tanabe, Hideki OKANO
Fatigue & Fracture of Engineering Materials & Structures 32 180 - 188 2009.3
-
Effects of Substrate Quenching after TiN Coating on Tribological Properties of TiN Film Reviewed
Hirotaka Tanabe, Yoshio Miyoshi, Tohru Takamatsu, Shuichi Sagara
Journal of Solid Mechanics and Materials Engineering 2 ( 8 ) 999 - 1007 2008.8
-
Evaluation of Fracture Strength of TiN Thin Film on Cemented Carbide Reviewed
Tohru TAKAMATSU, Yoshio MIYOSHI, Hirotaka TANABE and Takayoshi ITOH
JSME Journal of Solid Mechanics and Materials Engineering 2 ( 2 ) 281 - 290 2008.4